Legal notice

PLACEMENT TECHNIQUES.

Once we have the placing surface perfectly levelled off and with its appropriate slopes, we will prepare the adhesive glue cement for the exterior, C2E type, according to UNE-EN 12004, following the manufacturer’s instructions and we will spread a thin layer with a notched trowel, making preferably double-spread. For the tiles settlement we will beat them with a rubber hammer.

Before starting to grout, it is essential that the grip material has completely set the tiles, and that boards are empty and clean. The product used for grouting these boards should be suitable for exteriors (elastic and waterproof) type CG2 according to the UNE-EN 13888, to avoid cracking with the passage of time and to prolong the maintenance of the joints. Follow the manufacturer’s recommendations for the placement of adhesive joints.

You must give full consideration to expansion joints and their area should not exceed 25 m2 in exteriors, in order to avoid cracks in the pavement caused as a result of expansions and contractions.

NORMS FOR THE CORRECT INSTALLATION

FACTORY
Pol. Ind La Paz - Calle B S/N
Tel: 978 60 69 07 - Fax: 978 60 45 19 - 44195 TERUEL - SPAIN
administracion@turolgres.com - www.turolgres.com

DELEGATION AND WAREHOUSE
Ctra. Onda - Villareal km 3,5
Tel: 964 60 53 33 - Fax: 964 60 54 01 - 12200 ONDA(Castellón) SPAIN
onda@turolgres.com